15mm UPVC Beading
15mm UPVC beads are supplied to achieve a defined and functional finish when installing the Monocouche XF and EcoRend EXF systems.


Angle / Corner Bead
Installed at rendered corners and returns to achieve a consistent angle and protecting against impact.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 13kg


Stop Bead
Installed to achieve a consistent and defined termination at elevation boundaries and material junctions.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 9kg


Drip / Bell Bead
Installed to achieve a consistent and defined finish at the base of a rendered panel creating a “drip” forcing the water to fall and protecting the substrate below.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 11kg


Expansion / Movement Bead
Installed within the render coating directly above expansion joints within the masonry to achieve a neat and consistent enclosing detail.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 8kg


15mm UPVC Bead Colours

Standard colours

Non-standard colours

10mm UPVC Beading
10mm UPVC beads are supplied to achieve a defined and functional finish when installing the MonoTherm TXF system onto masonry.

Angle / Corner Bead
Installed at rendered corners and returns to achieve a consistent angle and protecting against impact.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 13kg


Stop Bead
Installed to achieve a consistent and defined termination at elevation boundaries and material junctions.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 9kg


Drip / Bell Bead
Installed to achieve a consistent and defined finish at the base of a rendered panel creating a “drip” forcing the water to fall and protecting the substrate below.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 11kg


Expansion / Movement Bead
Installed within the render coating directly above expansion joints within the masonry to achieve a neat and consistent enclosing detail.

Supplied in boxes containing 25 beads of 2.5 meters in length (62.5lm)
Box weight: 8kg


Mesh Beads
Supplied to achieve a defined and functional finish when installing the MonoTherm TXF system onto Render Carrier Board and Insulation.

Mesh Angle / Corner Bead
Installed at rendered corners and returns to achieve a consistent angle and protecting against impact.

Supplied in boxes containing 50 beads of 2.5 meters in length (62.5lm)
Box weight: 16kg


6mm Mesh Stop Bead
Installed to achieve a consistent and defined termination at elevation boundaries and material junctions.

Supplied in boxes containing 50 beads of 2.5 meters in length (62.5lm)
Box weight: 11kg


MonoMesh XF & MonoMesh TXF
MonoMesh Alkali Resistant Mesh is a fundamental stress absorbing component of the Monocouche XF, EcoRend EXF and MonoTherm TXF systems.

MonoMesh XF
10mm x 10mm 140g/m2 Manufactured to support installation of the Monocouche XF and EcoRend EXF systems.

Supplied in rolls 1m x 50m (50m2) and or pallets containing 30 rolls
Roll weight: 7kg / Pallet weight: 210kg


MonoMesh TXF
4mm x 4mm 160g/m2 Manufactured to support installation of the MonoTherm TXF system.

Supplied in rolls 1m x 50m (50m2) and or pallets containing 33 rolls
Roll weight: 8kg / Pallet weight: 264kg


BEADS are supplied in full boxes only and may arrive in a separate delivery to the render materials
MESH can be combined with material orders or purchased in full pallets

The content for your Tab goes here. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque pretium, nisi ut volutpat mollis, leo risus interdum arcu, eget facilisis quam felis id mauris. Ut convallis, lacus nec ornare volutpat, velit turpis scelerisque purus, quis mollis velit purus ac massa. Fusce quis urna metus. Donec et lacus et sem lacinia cursus.
Nationwide Enquiries & Support
0844 272 1467

monocouche xf
monotherm txf
monomend rxf
lafsystem