Upon receipt and review of your sample request we will inform you when you can expect to receive your samples and if there will be any charge for this service prior to sending.

Sample dimensions: 105mm x 90mm and suitable for planning consent.

We can also send a 25kg bag of Monocouche XF in any standard colour which can then be applied to an area at site (up to 1m2) for colour and finish approval.

These single 25kg bag samples are boxed and posted and charged at £30.00 exc vat

Any additional sample requirements should be outlined in the further information section or emailed to [email protected]

Unfortunately, we are being called to an increasing amount of projects with issues only to find that the builder or installer and chosen to ignore the clients material selection and use a different and often inferior product.

To avoid these issues once you have selected your Monocouche XF colour we advise that state to your builder or installer in writing….

“I wish to have Monocouche XF in colour XF Nimbus White installed at my project supplied by Monocouche Render Systems and as per the sample I have approved from them”

Monocouche Render Systems can accept no responsibility for issues or defects due to unauthorized specification or material change.

*Always remove the sample from the opaque protective sleeve when viewing.

*All samples are supplied as a guide only; it is advised that a sample panel be applied to an area at site for review and final approval.

Nationwide Enquiries & Support
0330 111 1467

monocouche xf
monotherm txf
monomend rxf