MONOCOUCHE XF – BEADS AND MESH
Generally…
- 15mm PVCu beading is used when installing the Monocouche XF system in scratch, sponge or trowel finish.
- 10mm PVCu beading is used when applying Monocouche XF in rough cast finish.
- 20mm PVCu beading should be considered when cutting ashlar detailing into Monocouche XF.
10mm, 15mm & 20mm PVCu BEADING
PVCu angle/corner beads are installed to rendered corners giving definition and provide protection against impact.
PVCu drip/bell beads are installed at the base of elevations to force water to fall away from the finishes below and protect against rising damp and capillary action.
PVCu stop beads are installed to give neat and level termination at elevation boundaries and material junctions.
PVCu expansion/movement beads are installed over expansion joints within the masonry substrate.
Visit our shop to purchase 10mm, 15mm & 20mm PVCu beads and render mesh.
STANDARD COLOURS
All 15mm White & Ivory PVCu beads are supplied in 2.5m lengths and boxes of 25 (62.5lm per box).
20mm PVCu beads are supplied in 2.5m lengths, box quantities may vary and should be confirmed when ordering.
NON-STANDARD BEAD COLOURS
Non-standard UPVc beads are supplied in 2.5m lengths, box quantities may vary and should be confirmed when ordering.
Cost and lead times for delivery may also increase over standard colours.
ALKALI RESISTANT MESH
MonoMesh XF
10mm x 10mm
Manufactured to support the installation of the Monocouche XF system.
Supplied in rolls 1m x 50m (50m2) or pallets containing 30 rolls.
Roll weight: 7kg / Pallet weight: 210kg
MonoMesh TXF
4mm x 4mm
Manufactured to support the installation of the silicone rendered system.
Supplied in rolls 1m x 50m (50m2) or pallets containing 30 rolls.
Roll weight: 8kg / Pallet weight: 240kg
Visit our shop to purchase 10mm, 15mm & 20mm PVCu beads and render mesh.